ykxmz/_build/setup_named_tunnel.sh

#!/bin/bash
# 建具名隧道（固定域名），替换掉会变地址的匿名隧道。
#
# 前提：已经 cloudflared tunnel login 授权过（/root/.cloudflared/cert.pem 存在）
#
# 做的事：
#   1. 建一个叫 lanremote 的隧道
#   2. 把 relay.<域名> 指到它
#   3. 写隧道配置（指向本机 8080）
#   4. 改 systemd 服务，改成跑具名隧道
#   5. 重启并验证
#
# 具名隧道的好处（对比匿名）：
#   * 地址固定，不用每次重启都改客户端配置
#   * 不受匿名隧道限流（实测匿名隧道经常 context deadline exceeded）
#   * Cloudflare 官方支持的生产用法
set -u

DOMAIN="${1:-xxmxxs.top}"
HOSTNAME_FULL="${2:-relay.${DOMAIN}}"
TUNNEL_NAME=lanremote
CF_DIR=/root/.cloudflared
RELAY_DIR=/root/lanremote-relay
CONF="$CF_DIR/config.yml"

echo "============================================================"
echo "  建具名隧道：$TUNNEL_NAME   域名：$HOSTNAME_FULL"
echo "============================================================"
echo

# ---------- 0. 检查授权 ----------
echo "[0/6] 检查授权"
if [ ! -f "$CF_DIR/cert.pem" ]; then
    echo "  ✗ 还没有 cert.pem —— 请先在浏览器里完成授权"
    echo "    链接： $(cat /root/cf_login_url.txt 2>/dev/null)"
    exit 1
fi
echo "  ✓ cert.pem 存在"

# ---------- 1. 建隧道 ----------
echo
echo "[1/6] 创建隧道"
EXISTING=$(cloudflared tunnel list 2>/dev/null | awk -v n="$TUNNEL_NAME" '$2 == n {print $1}')
if [ -n "$EXISTING" ]; then
    TUNNEL_ID="$EXISTING"
    echo "  已存在，ID: $TUNNEL_ID"
else
    OUT=$(cloudflared tunnel create "$TUNNEL_NAME" 2>&1)
    echo "$OUT" | sed 's/^/    /'
    TUNNEL_ID=$(echo "$OUT" | grep -oE '[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}' | head -1)
    if [ -z "$TUNNEL_ID" ]; then
        TUNNEL_ID=$(cloudflared tunnel list 2>/dev/null | awk -v n="$TUNNEL_NAME" '$2 == n {print $1}')
    fi
fi
if [ -z "$TUNNEL_ID" ]; then
    echo "  ✗ 拿不到隧道 ID"
    exit 1
fi
echo "  隧道 ID: $TUNNEL_ID"

# ---------- 2. 凭据文件 ----------
echo
echo "[2/6] 检查凭据文件"
CRED="$CF_DIR/${TUNNEL_ID}.json"
if [ ! -f "$CRED" ]; then
    echo "  ✗ 找不到凭据 $CRED"
    ls -la "$CF_DIR"
    exit 1
fi
echo "  ✓ $CRED"

# ---------- 3. 配 DNS ----------
echo
echo "[3/6] 把 $HOSTNAME_FULL 指向这个隧道"
DNS_OUT=$(cloudflared tunnel route dns "$TUNNEL_NAME" "$HOSTNAME_FULL" 2>&1)
echo "$DNS_OUT" | sed 's/^/    /'
if echo "$DNS_OUT" | grep -qi 'already exists'; then
    echo "  (DNS 记录已存在，跳过)"
fi

# ---------- 4. 写配置 ----------
echo
echo "[4/6] 写隧道配置"
cat > "$CONF" <<EOF
# 局域网遥控 · 具名隧道配置
tunnel: $TUNNEL_ID
credentials-file: $CRED

ingress:
  - hostname: $HOSTNAME_FULL
    service: http://127.0.0.1:8080
    originRequest:
      # 长轮询每个请求挂 25 秒，超时要给够
      connectTimeout: 30s
      # 中转是流式响应，关掉缓冲
      noTLSVerify: false
      disableChunkedEncoding: false
  - service: http_status:404
EOF
echo "  已写 $CONF"
cat "$CONF" | sed 's/^/    /'

# ---------- 5. 改 systemd ----------
echo
echo "[5/6] 改 systemd 服务为具名隧道"
cat > /etc/systemd/system/lanremote-tunnel.service <<EOF
[Unit]
Description=LanRemote Cloudflare 具名隧道
After=network-online.target lanremote-relay.service
Wants=network-online.target
Requires=lanremote-relay.service

[Service]
Type=simple
# 具名隧道：地址固定为 $HOSTNAME_FULL
# 仍然强制 IPv4 —— 这条 4G 线路有 IPv6 地址但实际不通
ExecStart=/usr/local/bin/cloudflared tunnel --no-autoupdate --edge-ip-version 4 --config $CONF run $TUNNEL_NAME
Restart=always
RestartSec=5
MemoryMax=128M
StandardOutput=append:$RELAY_DIR/tunnel.log
StandardError=append:$RELAY_DIR/tunnel.log

[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl stop lanremote-tunnel 2>/dev/null || true
pkill -f 'cloudflared tunnel --no-autoupdate' 2>/dev/null || true
sleep 2
rm -f "$RELAY_DIR/tunnel.log"
systemctl start lanremote-tunnel
echo "  已启动"

# ---------- 6. 验证 ----------
echo
echo "[6/6] 等着并验证"
# 一定要带 https:// —— public_url() 只认以 http 开头的，
# 少了协议头 /url 接口会显示"还没有地址"。
echo "https://$HOSTNAME_FULL" > "$RELAY_DIR/public_url.txt"
sleep 12

for i in 1 2 3 4 5 6; do
    CODE=$(curl -s -o /dev/null -w '%{http_code}' --max-time 15 \
           "https://$HOSTNAME_FULL/v1/health")
    if [ "$CODE" = "200" ]; then
        echo "  第 $i 次: ✓ 通了"
        break
    fi
    echo "  第 $i 次: HTTP $CODE（隧道可能还在建）"
    sleep 8
done

echo
echo "  服务状态: $(systemctl is-active lanremote-tunnel)"
echo "  隧道日志尾部:"
tail -5 "$RELAY_DIR/tunnel.log" | sed 's/^/    /'

echo
echo "============================================================"
echo "  公网地址（固定，不会再变）："
echo "      https://$HOSTNAME_FULL"
echo "  管理页："
echo "      https://$HOSTNAME_FULL/?key=\$(cat $RELAY_DIR/data/admin_key.txt)"
echo "============================================================"
echo
echo "  接下来在被控端执行一次："
echo "      LanRemote-Agent.exe --relay https://$HOSTNAME_FULL"
echo "  手表首页「中转设置」里填同一个地址。"